Oxdigi Marble Contact Paper 24 x 196 inches Self Adhesive Peel & Stick Wallpaper for Kitchen Countertop Cabinet Furniture Waterproof PVC Removable White-Oxdigi

Decorative Contact Paper for cabinet, countertop, shelf liner, drawer liner, table, closet, desk, door, fridge and DIY craft work.
Multi-Purpose: Can be used in kitchen, living room, bed room, office, children's bedrooms, playroom or even in bathroom. Apply for smooth and flat surface.
Feature: waterproof; Super easy to install, there is grid lines on the back of the marble contact paper for easy cutting.
Peel and stick; Removable; Easy to cut, install, paste.
Size: 24" x 196" ( 0.61m x 5m / 2.0 x 16.4 feet)

Product Description


Step 1: Roughly measure the area you will be covering and transfer the measurements to the back side of the contact paper. Grid lines are marked on the back of the contact paper to assist you in measuring accurately. Cut the contact paper to the measured size.	Step 2: Peel away approximately 1 inch of the backing paper. Line up the exposed contact paper with one edge of the apply surface. Press down lightly to bond the paper and the surface together.	Step 3: Smooth the paper from the center outward, working toward both the left and the right. Grip the backing paper that is peeled away and pull slightly so that the backing comes off little by little while you press the paper down with the squeege.	Step 4: If there is a bubble under the paper, you can use a small stright pin to poke a tiny hole in the bubble, and smooth down from the edges of the bubble toward the hole to smooth out air bubbles under contact paper.

Decorative Contact Paper for cabinet, countertop, shelf liner, drawer liner, table, closet, desk, door, fridge and DIY craft work.
Multi-Purpose: Can be used in kitchen, living room, bed room, office, children's bedrooms, playroom or even in bathroom. Apply for smooth and flat surface.
Feature: waterproof; Super easy to install, there is grid lines on the back of the marble contact paper for easy cutting.
Peel and stick; Removable; Easy to cut, install, paste.
Size: 24" x 196" ( 0.61m x 5m / 2.0 x 16.4 feet)


Step 1: Roughly measure the area you will be covering and transfer the measurements to the back side of the contact paper. Grid lines are marked on the back of the contact paper to assist you in measuring accurately. Cut the contact paper to the measured size.	Step 2: Peel away approximately 1 inch of the backing paper. Line up the exposed contact paper with one edge of the apply surface. Press down lightly to bond the paper and the surface together.	Step 3: Smooth the paper from the center outward, working toward both the left and the right. Grip the backing paper that is peeled away and pull slightly so that the backing comes off little by little while you press the paper down with the squeege.	Step 4: If there is a bubble under the paper, you can use a small stright pin to poke a tiny hole in the bubble, and smooth down from the edges of the bubble toward the hole to smooth out air bubbles under contact paper.